How to Make Your Own Taba Squishy: Step-by-Step DIY Guide

Quick answer

To make your own Taba Squishy, start with a complete DIY squishy kit like the Cheese Squishy Making Kit. Mix your colors, pour into the mold, add glitter or details, then demold and enjoy. The key is measuring accurately and letting each layer set before adding the next.

What you need before you start

A good DIY squishy kit includes the mold, mixing cups, stirring sticks, and the squishy compound. The Cheese Squishy Making Kit from the TabaSquishy DIY Studio has everything for a cheese-inspired squishy, but you can apply the same steps to any mold. Work on a covered surface, wear gloves if you prefer, and keep a damp cloth nearby for quick cleanups. Read the kit instructions first because curing times can vary by product.

Step 1: Mix your colors

Pour equal parts of your squishy compound into separate cups, then add a few drops of color to each. Stir slowly for about 30 seconds until the color is even. A common mistake is over-stirring, which adds air bubbles. If bubbles appear, let the mixture rest for a minute before pouring.

Step 2: Pour into the mold

Pour your first color into the cheese mold, filling it about halfway. If you want a layered look, pour one color, let it set slightly, then add the next. Tilt the mold gently to spread the mixture into corners. Checkpoint: tap the mold on the table a few times to release trapped air.

Step 3: Add glitter or details

While the surface is still tacky, sprinkle glitter or place small colorful details on top. This is where customizing your squishy toy gets fun. Don't overload it; a little glitter goes a long way. If you add too much, it can affect how the squishy feels.

Step 4: Let it cure

Follow your kit's curing time, usually several hours or overnight. Place the mold in a dust-free area at room temperature. Don't rush this step by using heat, which can warp the mold or make the squishy sticky. Checkpoint: the squishy is ready when it pulls away from the mold edges cleanly.

Step 5: Demold and enjoy

Gently peel the mold away from the squishy, starting at one corner. If it sticks, wait another hour. Once demolded, squeeze and stretch your creation. The slow rebound and soft feel come from the material, so enjoy the squish. Store it in a cool, dry place when not in use.

DIY steps at a glance

1. Mix colors: Combine equal parts of squishy compound and add color drops, stirring slowly to avoid bubbles. Checkpoint: mixture should be smooth and evenly colored.
2. Pour into mold: Fill the mold halfway, tap to remove air, and add layers if desired. Checkpoint: no large bubbles on the surface.
3. Add details: Sprinkle glitter or place small items on the tacky surface for customization. Checkpoint: details stick without sinking.
4. Cure: Let the squishy set at room temperature for the time specified in your kit. Checkpoint: squishy pulls away from mold edges cleanly.
5. Demold and enjoy: Peel the mold away gently, then squeeze and stretch your finished squishy. Checkpoint: squishy is soft and rebounds slowly.

Product facts

• Cheese Squishy Making Kit | Make Your Own Taba Squishy: The Cheese Squishy Making Kit lets you create your own cheese-inspired Taba Squishy from start to finish. Mix colors, pour into the cheese mold, add glitter or details, then demold and enjoy. This kit provides all the supplies for a complete DIY project, so you can make a custom squishy without buying separate materials.
• The Reading Penguin: The Reading Penguin is a handmade Taba Squishy made from food-grade silicone with a soft, slow-rebound texture, ideal for stress relief. If you prefer a pre-made option, this squishy offers the same squishy satisfaction without the DIY steps.